SIBSA
Descripción
1800 COMFORT
MICROCHEM® by AlphaTec® 1800 COMFORT
was developed in collaboration with the market leader in wind generation power systems.
Features & Benefits
Protection – Proven barrier to low concentration liquid chemicals and airborne particlates
Comfort – Air and moisture vapor permeable (‘breathable’) SMS hood, full back and underarms to help reduce the risk of heat stress
Silicone free – Critical in spray painting applications
Low linting – Reduces the risk of fiber contamination in some critical areas Optimized body fit – Improves wearer comfort and safety
Anti-static – Tested according to EN1149-5 and AATCC 76
Applications
• Composites
• General Maintenance • Paint Spraying
• Surface Preparation
Protection Levels & Additional Properties
TYPE 5 TYPE 6 EN 1073-2
Bound Seams
Superior strength, liquid and particle barrier
|
Style 68-1800C |
|
Suit Features • 3 piece hood Sizes: S-5XL (02-09) Case Qty: 25 Color: White |
|
CATALOG #: Model 195: WH18-B-92-195 |
CAUTION: This product contains natural rubber latex which may cause allergic reactions.
MICROCHEM by AlphaTec – Ansell – North America
111 Wood Avenue, Suite 210, Iselin, NJ 08830 USA: 1-800-800-0444 Canada: 1-800-363-8340
www.ansell.com
® and TM are trademarks owned by Ansell Limited. © 2017 Ansell Limited. All Rights Reserved.
1800
COMFORT
Technical Data
noitcurtsnoC cirbaF 0002 ®DRAGORCIM
MPL (Microporous laminate)
SMS (Spunbond meltblown spunbond)
1 2
3
1
Microporous polyethylene film
Nonwoven outer layer
Meltblown layer
Nonwoven inner layer
v0517
2
|
sdiuqil selcitrap tsud ruopav erutsiom Fabric Physical Properties |
Test Method |
Units |
MPL Results |
SMS Results |
|
Tensile strength (MD) |
ASTM D5034 |
lbs |
17.66 |
26.3 |
|
Tensile strength (CD) |
24.44 |
20.8 |
||
|
Tear resistance (MD) |
ASTM D5733 |
lbs |
7.2 |
7.2 |
|
Tear resistance (CD) |
12.4 |
6.5 |
||
|
Burst strength |
ASTM D3787 |
lbs |
21 |
25 |
|
Flame spread |
16 CFR §1610 |
sec |
17.3 |
IBE * |
|
(class) |
(1) |
(1) |
||
|
Barrier Properties |
Test Method |
Units |
Results |
|
|
Fabric Hydrohead |
ISO 20811 |
cm H2O |
119.5 |
>40 |
|
Whole suit particle inward leakage** |
ISO 13982-2 |
% TIL |
3.96% |
|
|
Comfort Properties |
Test Method |
Units |
Results |
|
|
Moisture vapor transmission |
ASTM E96, Method B |
g/m2-24 hr |
709 |
1380 |
|
Air Permeability |
ASTM D737 |
ft3 / ft2 |
<0.13 |
30.7 |
* IBE – ignited but extinguished
** Whole suit particle inward leakage testing performed with self-adhesive tape sealing the full face respirator, gloves and boots to the coverall and additional tape applied over the zipper flap. Particle size range of 0.02-2 microns with a mass median of 0.6 microns. Data for model 111 coveralls. Result for other models may vary. Please contact the Ansell technical team for information on a specific model customerserviceus@ansell.com
MICROCHEM by AlphaTec – Ansell – North America
111 Wood Avenue, Suite 210, Iselin, NJ 08830 USA: 1-800-800-0444 Canada: 1-800-363-8340
www.ansell.com
