SIBSA
Descripción
|
69-210 69-318 Natural Rubber Latex Glove |
Handle the most intricate and delicate products with incredible sensitivity
FEATURES AND BENEFITS:
Comfort, Strength and Sensitivity
The strength and comfort of 100% natural rubber latex, 5 mil thickness for the highest degree of sensitivity
2 versions available to better fit your needs
69-210 : Powdered, Smooth Grip 69-318 : Powder Free, Textured Finish for better grip
Food Compliant
Both the TouchNTuff® 69-210 and 69-318 comply with FDA food handling requirements (21 CFR 177.2600).
WARNING: This product contains natural rubber latex which may cause allergic reactions in some individuals.
*Style 69-318 formerly known as Conform®XT *Style 69-210 formerly know as Conform®
|
69-210 69-318 Natural Rubber Latex Glove |
TECHNICAL DATA SHEET:
PRODUCT INFORMATION:
|
69-210 |
69-318 |
|
|
Material |
Natural Rubber Latex |
|
|
Color |
Natural |
|
|
Glove Design |
Ambidextrous, Powdered, Smooth Grip |
Ambidextrous, Powder Free, Textured Grip |
|
Cuff |
Beaded Cuff |
|
|
Audit Standards |
ISO 9001:2008, ISO 13485:2003, US FDA 21 CFR PART 820 (QSR), and Canadian MDR |
|
|
Quality Control |
Incoming for both raw materials and packaging materials, in-process (QA pre-packing inspection) and final release (QA pre-shipment inspection) for all gloves produced. |
|
|
Packaging |
100 gloves per dispensers, 10 dispensers per shipper carton, 1000 gloves per shipper carton |
|
|
Storage |
Keep out of direct sunlight; store in a cool and dry place. Keep away from sources of ozone or ignition. |
|
|
Country of Origin |
Malaysia |
|
PHYSICAL PROPERTIES:
|
PROPERTY |
TYPICAL VALUES |
TESTING METHOD |
|||||
|
SIZE |
XS 51⁄2 – 6 |
S 61⁄2 – 7 |
M 71⁄2 – 8 |
L 81⁄2 – 9 |
XL 91⁄2 – 10 |
ASTM D3767/EN 420 |
|
|
Length (mm) |
69-210 |
NA |
240 |
240 |
240 |
240 |
|
|
69-318 |
240 |
240 |
240 |
240 |
240 |
||
|
Average Palm Width (mm) |
69-210 |
NA |
80 |
95 |
102 |
111 |
|
|
69-318 |
75 |
85 |
95 |
106 |
116 |
||
|
Freedom from Holes (Inspection level I) |
1.5 AQL |
ASTM D5151/EN 374-2 |
|
|
Palm Thickness Single Wall |
(mm: 0.12) / (mils: 5) |
ASTM D3767/EN 420 |
|
|
BEFORE AGING |
AFTER AGING |
||
|
Ultimate Tensile Strength |
Min 18 Mpa |
Min 14 Mpa |
ASTM D 412-06a |
|
Elongation at Break (%) |
Min 650 |
Min 500 |
ASTM D 412-06a |
ORDERING INFORMATION:
For additional information visit us at www.ansell.com, or call us at
North America: +1800 800 0444 Latin America: +55 11 3356 3100 Asia Pacific: +852 2185 0600 Europe: +32 2 528 74 00 Australia: +61 1 800 337 041
EN 374 EN 374
EN 374
EN 421
|
SIZE |
XS |
S |
M |
L |
XL |
|
|
69-210 |
ASPN |
NA |
516704 |
516705 |
516706 |
516707 |
|
ORACLE |
NA |
104986 |
104987 |
104988 |
104989 |
|
|
69-318 |
ASPN |
516699 |
516700 |
516701 |
516702 |
516703 |
|
ORACLE |
104985 |
105072 |
105073 |
105074 |
105075 |
® and TM are trademarks owned by Ansell Limited or one of its affiliates. © 2014 All Rights Reserved.
06262014
