QUIM-MIC-193-L Ansell

Descripción

1800 COMFORT

MICROCHEM® by AlphaTec® 1800 COMFORT

was developed in collaboration with the market leader in wind generation power systems.

Features & Benefits
Protection – Proven barrier to low concentration liquid chemicals and airborne particlates

Comfort – Air and moisture vapor permeable (‘breathable’) SMS hood, full back and underarms to help reduce the risk of heat stress

Silicone free – Critical in spray painting applications
Low linting – Reduces the risk of fiber contamination in some critical areas Optimized body fit – Improves wearer comfort and safety
Anti-static – Tested according to EN1149-5 and AATCC 76

Applications

• Composites
• General Maintenance • Paint Spraying
• Surface Preparation

Protection Levels & Additional Properties

TYPE 5 TYPE 6 EN 1073-2

Bound Seams

Superior strength, liquid and particle barrier

Style 68-1800C

Suit Features

• 3 piece hood
• 2-way front zipper with re-sealable storm flap • Elasticated wrists, waist, and ankles
• Finger loops
• Blue SMS hood, full back and underarms

Sizes: S-5XL (02-09) Case Qty: 25 Color: White

CATALOG #: Model 195: WH18-B-92-195

CAUTION: This product contains natural rubber latex which may cause allergic reactions.

MICROCHEM by AlphaTec – Ansell – North America

111 Wood Avenue, Suite 210, Iselin, NJ 08830 USA: 1-800-800-0444 Canada: 1-800-363-8340

www.ansell.com

® and TM are trademarks owned by Ansell Limited. © 2017 Ansell Limited. All Rights Reserved.

1800

COMFORT

Technical Data

noitcurtsnoC cirbaF 0002 ®DRAGORCIM

MPL (Microporous laminate)

SMS (Spunbond meltblown spunbond)

1 2

3

1

Microporous polyethylene film

Nonwoven outer layer

Meltblown layer

Nonwoven inner layer

v0517

2

sdiuqil selcitrap tsud ruopav erutsiom

Fabric Physical Properties

Test Method

Units

MPL Results

SMS Results

Tensile strength (MD)

ASTM D5034

lbs

17.66

26.3

Tensile strength (CD)

24.44

20.8

Tear resistance (MD)

ASTM D5733

lbs

7.2

7.2

Tear resistance (CD)

12.4

6.5

Burst strength

ASTM D3787

lbs

21

25

Flame spread

16 CFR §1610

sec

17.3

IBE *

(class)

(1)

(1)

Barrier Properties

Test Method

Units

Results

Fabric Hydrohead
(Resistance to water penetration)

ISO 20811

cm H2O

119.5

>40

Whole suit particle inward leakage**

ISO 13982-2

% TIL

3.96%

Comfort Properties

Test Method

Units

Results

Moisture vapor transmission

ASTM E96, Method B

g/m2-24 hr

709

1380

Air Permeability

ASTM D737

ft3 / ft2

<0.13

30.7

* IBE – ignited but extinguished

** Whole suit particle inward leakage testing performed with self-adhesive tape sealing the full face respirator, gloves and boots to the coverall and additional tape applied over the zipper flap. Particle size range of 0.02-2 microns with a mass median of 0.6 microns. Data for model 111 coveralls. Result for other models may vary. Please contact the Ansell technical team for information on a specific model customerserviceus@ansell.com

MICROCHEM by AlphaTec – Ansell – North America

111 Wood Avenue, Suite 210, Iselin, NJ 08830 USA: 1-800-800-0444 Canada: 1-800-363-8340

www.ansell.com

¿Te interesa este servicio?

Haz click para mándar Whatsapp